Environmental Declaration solution
EPD.FDES.PEP ecopassport®.
INIES, PEP ecopassport®, EPD International, IBU, EPD Hub, NMD: we produce your declarations in the programme your markets expect.
We publish in every programme
Let's talk about your project
Fill in this form, a Releaf Carbon expert will reply within 24 h.
Programs covered
Every programme, one team
We run the LCA, draft the declaration, manage third-party verification and publish in the program that fits each of your markets.

FDES
Construction · FranceBase INIES
The declaration for construction products on the French market - published on INIES, required by RE2020.

PEP ecopassport®
Electrical · InternationalP.E.P. Association
The reference program for electrical, electronic and HVAC products.

EPD International
InternationalThe International EPD® System
The most widely used EPD program internationally, per ISO 14025 and EN 15804.

NMD
NetherlandsNationale Milieudatabase
The Dutch environmental database, required for MPG calculations and the Dutch building market.

IBU
Germany · EuropeInstitut Bauen und Umwelt e.V.
The German reference program for construction EPDs, recognised across Europe.

EPD Hub
InternationalEPD Hub Ltd
A fully digital program to publish verified EPDs on short lead times.
Another program in mind? Let's talk
Which one do you need
FDES, EPD or PEP: the table
Three declarations, three markets. The right one depends on what you sell and to whom. Often two are needed, built on the same LCA.
| Criterion | FDESConstruction, France | EPDExport, international | PEPElectrical, HVAC |
|---|---|---|---|
| For which products | Construction products sold in France: insulation, structure, joinery, coverings, clay, concrete. | Any product sold outside France, construction first, under the programme's PCR. | Electrical, electronic and HVAC equipment: heat pumps, air conditioning, lighting, switchgear. |
| Programme | INIES | EPD International, IBU, EPD Hub, NMD | PEP ecopassport® |
| Standard | NF EN 15804+A2 and the French complement | ISO 14025, EN 15804+A2 or the programme's PCR | ISO 14025, PEP PCR and the family's PSR |
| Read by RE2020 | Yes, directly. | No, unless also filed on INIES. | Yes, through INIES. |
| Validity | 5 years | 5 years | 5 years |
| Verification | INIES-approved verifier | Verifier approved by the programme | PEP-approved verifier |
They trusted us with their declarations
Manufacturers who already have their declaration
Clay, concrete, joinery, decking, HVAC, switchgear: we publish FDES, EPDs and PEPs for manufacturers of every size.
Your products, your trades
Every building product has its declaration
Insulation, structure, lighting, HVAC… FDES for construction products, PEP ecopassport® for electrical and HVAC, EPD for international markets: whatever your trade, we speak your product language.
FDESInsulation
FDESConcrete & structure
FDESJoinery & windows
PEPLighting
PEPHVAC
EPDSolar PV
Why publish a declaration
Six reasons to formalise your impacts
RE2020 requirement
FDES is mandatory for construction products subject to RE2020 thresholds and EU Taxonomy.
Access to public tenders
Public procurement and large clients increasingly require a verified declaration.
B2B differentiation
Highlight your eco-design efforts against non-declared competitors.
External credibility
Independent third-party verification, publication on official databases.
Consumer transparency
Environmental labelling, clear and defensible product sheets.
A defensible file
Traced assumptions, versioned databases, complete evidence file: your declaration holds up to the verifier and to your competitors.
What we read in INIES
The INIES database, re-read by us
We extract and re-read the whole INIES database regularly: expiring declarations, families with no declaration, competitors already declared. Four figures from our latest reading.
Source: INIES database, Releaf Carbon extract of 3 August 2026.
- 8,932
- declarations online
- 6,462 individual FDES, 1,784 PEPs, 517 collective declarations and 1,782 default datasets.
- 771
- declaring organisations
- Manufacturers, trade bodies and groups that have already taken the step. Your competitors are probably among them.
- 1,391
- declarations still under the old A1 version
- To be redone under +A2 at expiry. A stock of updates verifiers will absorb in 2027 and 2028.
- 1,065
- declarations expire in 2028
- And 1,896 more in 2029. A declaration expiring in 2028 is relaunched in 2027, ahead of the queue.
Want to know where your declarations and your competitors' stand? Ask for our reading of your family
What a declaration changes
Default data versus individual declaration
When a product has no declaration, RE2020 software uses a default environmental value, deliberately inflated. Here is the gap on a common product, read from INIES.
Same product, same use: the individual declaration divides the impact taken into account by more than two. That is the figure the specifier sees.
53% less impact in the calculation
Source: INIES database, total climate change indicator, Releaf reading 2026.
Our methodology
Publishing a declaration, in 4 steps
From LCA to publication on INIES or EPD International, we deliver a defensible declaration.
Identify the right standard (FDES / EPD / PEP), perimeter and specific rules (PCR, PSR).
Our methodology
Publishing a declaration, in 4 steps
From LCA to publication on INIES or EPD International, we deliver a defensible declaration.
Scoping & framework
Identify the right standard (FDES / EPD / PEP), perimeter and specific rules (PCR, PSR).
Underlying LCA
Product modelling along the chosen framework, matching on official databases, calculation of the 28 indicators.
Third-party verification
Critical review by accredited verifier, resolution of non-conformities, final validation.
Publication & dissemination
Filing on INIES (FDES), EPD International (EPD) or PEP ecopassport®. Communications kit for your teams.
Automation
From BOM to verification, on autopilot
Our solutions ingest your bills of materials and run the whole chain: modelling, calculation, drafting and the verification package - no re-keying.
$ releaf run declaration --bom product_A.xlsx
BOM import - bill of materials parsed
Factor matching - Ecoinvent · INIES
EN 15804+A2 calculation - 28 indicators · modules A1→D
Declaration generated - PDF + ILCD/XML
Package sent to the third-party verifier
Time saved
- 01BOM importedYour bill of materials comes in as is - ERP, PLM or Excel.
- 02Automatic modellingEvery component is matched to the right impact factors, assumptions tracked.
- 03Compliant calculation28 EN 15804+A2 indicators, modules A1→D, built-in consistency checks.
- 04Declaration generatedFDES or EPD drafted in the format expected by the target program.
- 05Third-party verificationA complete evidence package sent to the verifier - fewer back-and-forths.
- 28
- indicators calculated
- A1→D
- modules covered
- 6
- publication programs
Who does the work
The people who sign your declarations
No anonymous subcontracting: an in-house LCA team in Lille that follows your file from scoping to publication and answers the verifier on your behalf.
The whole team
Nathan Gourdin
Co-founder, eco-design expert
Leads environmental declarations and key accounts. Scopes every file with the verifier.

Thomas Schmitt
Senior LCA consultant
Models product families and builds the reusable models, from bill of materials to the 28 indicators.

Evane Durand
LCA consultant
Collects and checks plant data, drafts the declarations and assembles the verification files.
FAQ